Cleanroom Wiper Material

A Cleanroom wiper is a low lint cloth used in a Cleanroom or controlled environment to wipe away surface contamination and spills. Common cleanroom contaminates would be solid particles, liquids and bio contaminants. Different types of Cleanroom wiper material have been developed to offer absorbency, cleanliness, resistance to chemicals and abrasion resistance.

DRY KNITTED WIPES are the cleanest level of Cleanroom wiper. Most widely used in a Class 10 (ISO 4) and Class 100 (ISO 5) cleanroom. The wipes are made from polyester and have a variety of edges and styles.

-Strong, will not tear, non-shedding

-Clean, low in particles, used in the most critical applications and critical Cleanrooms

-Soft, Non-Abrasive

-Sterile, low bio contaminants

-Particle capture and retention properties.

100% CONTINUOUS FILAMENT POLYESTER – Types of Edges and Styles

-Knife Cut Edge – Edges cut with a knife

-Laser Sealed Edge – Edges sealed with a laser

-Ultrasonically Sealed Edge– Ultra sonic heat seal to cut and seal the edges

-Bordered Sealed Edge – Four sided border sealed edge

-Light Weight or Heavy Weight– Thinner or thicker material

DRY NON WOVEN WIPES can be made through many different methods. Meltblown material is extruded and formed into a batting which is than thermally bonded. Another method has Hydroentangled fibres which has thousands of high-pressure pin size jets that shoot water at the batting of blended fibres to form the material. This method uses no binders. Each fibre material has unique qualities making it suitable for different applications as a Cleanroom wipe.